PRE-ORDER ONLY!!!! Fulfillment will start in Early May. Lightweight 7075-T6 Aluminum Barrel Nut for Noveske NSR, NHR, NQR 5.56/.223/.300BLK Also Fits PSA and others
Growing is fun, exciting and scary all at the same time, so thanks for sticking with us!
If you have any questions or concerns prior to placing your order, please don't hesitate to email us at: email@example.com as we are here to help!
Thank you for your patience, understanding and especially your support!
If you're looking to shed some weight from your AR rifle or pistol with a Noveske-spec rail, this is a great way to do it!
Barrel Nuts are machined from US-made 7075-T6 Aircraft Grade Aluminum then tumbled and coated with CeraKote Graphite Black by the good folks at Icarus Precision in Washougal, WA. We've tested these Aluminum barrel nuts on everything from precision builds to select-fire M-16 guns with zero issues and completed torque testing by taking the nuts to 90 ft-lbs, though we do not recommend, nor will we warranty over-torquing!
Designed and machined by Americans at a Veteran owned machine shop in Washington State.
Factory steel Noveske barrel nut weight(does not include screws): 3.0 oz/87.8 grams
BLP 7075-T6 barrel nut weights(does not include screws): Approximately .84oz/23.9g
We have changed the factory Noveske mounting screw thread pitch from 10-24 to 10-32 thread pitch in an effort in increase clamping force and reduce the possibility of cross-threading. All barrel nuts ship with six STEEL 10-32 hex head cap screws with Titanium versions also available as an option.
Total Weight With Six(6) Button Head Steel Cap Screws:
Total Weight With Six(6) Button Titanium Button Head Cap Screws:
Weight of Six(6) 10-32 x 1/4" Steel Button Head Cap Screws:
Weight of Six(6) 10-32 x 1/4" Titanium Button Head Cap Screws:
You will not be able to use your factory Noveske install wrench and will instead need either a 30mm or 1-3/16" crows foot. We realize this is a bit of an inconvenience, but it was done for strength reasons.
30mm can be found here: https://www.amazon.com/Sunex-97330-2-Inch-Crowfoot-Polished/dp/B002YK9QB8/ref=sr_1_1?ie=UTF8&qid=1513837620&sr=8-1&keywords=30mm+crows+foot
1-3/16" can be found here: https://www.amazon.com/Sunex-97738-Crowfoot-16-Inch-Polished/dp/B0074HN8BA/ref=sr_1_2?ie=UTF8&qid=1513837620&sr=8-2&keywords=30mm+crows+foot
We recommend a torque value over 30 ft-lbs and under 50 ft-lbs using the three step method prescribed per milspec including use of anti-seize or install grease.
Fits the following rails/handguards:
Any Noveske NSR, NHR and NQR 5.56/.223/.300BLK size. MAY also fit PSA and other 5.56 sized rails that use pinch clamps along with a 1.347" to 1.52" O.D. barrel nut(34.22mm to 34.34mm). Please confirm with calipers before ordering.
Does NOT FIT .308-spec rails. Will NOT FIT Noveske SWS rails or ANY SMOS-spec rails as the rail mounting hole placement is different.
OEM Noveske Nut: 3oz/87.8g
BLH 7075-T6 Aluminum Nut: .8oz/23g